Path: Home » products » Time products » gle/HGIG-100

gle/HGIG-100


Main features
• Twelve channel GPS L1 receiver

• IRIG B time code generator.

• GPS/UTC time synchronization.


• 1 PPS output.

• NMEA 0183 output, including GPS/UTC Time & Position.

• Internal rechargeable LiPo battery cell.

Applications

Time synchronization of stand-alondata acquisition equipment, installed on off-road, armoured, heavy-duty and railway vehicles, manned and unmanned aerial platforms, boats and vessels…
 

Overview
gle/
HGIG-100 is a compact and robust GPS/UTC synchronized timecode generator, which provides IRIG B122, 1 PPS signal and NMEA 0183 output.  
It is designed to accurately synchronize the internal time of standalone data acquisition 
equipment. 
The active GPS antenna, installed on the top panel, may be disconnected to use an external one.  

If no GPS signal is received, gle/HGIG-100 switches to the internal clock and continues to generate the time without any significant change in the IRIG-B timecode and in the serial NMEA data stream.  

The unit is equipped of a 2000mAh LiPo battery.  The internal battery charger works with a standard +5V USB connection to PC or with the supplied AC/DC USB wall adapter.

Main characteristics

IRIG-B Output Format

B122; 1kHz AM Modulated

IRIG-B Output Level

2.1Vp-p (Mark), 0.7Vp-p (Space)

IRIG-B Connector Type

BNC, 50 Ohm Impedance

1 PPS Signal Level

>2.0V (Typ.) @ 50 Ohm load

1 PPS Pulse Width

High for 2ms

1 PPS  Connector Type

BNC, 50 Ohm Impedance

NMEA 0183 RS 232 Output

9600 Baud, 8 bit, No Parity, $GPGGA Message

NMEA 0183 Connector Type

DSUB 9 Pin Socket

GPS Antenna

Active Type

GPS Connector

SMA Socket

Timing Accuracy

+/-0.5 PPM (when not locked to GPS / over the entire temp. range)

Nominal battery run time

5 hours

Nominal battery charge time

5 hours (unit switched off)

Operating Temperature Range

-10 to +55 °C (During battery charging: 0 to +40 °C)

Dimensions (L x D x H)

140 x 120 x 51 mm (including GPS antenna, excluding connectors)

This product is not intended for applications whose its failure to perform can be expected to cause damages to properties and/or persons and/or injury to human life.

Slider


PDF

gle/HGIG-100 - Datasheet